IX180 - Sequencing Timer - AC Version
New from Bigelow Brook Farm!
(ships for a flat rate of $12.50 within the continental U.S. Shipping costs to other locations may vary)
Fully Automated with Multiple Configuration Options
The IX-180 series sequencing timing controllers (also known as percentage or indexing timers) allows you to set up your aquaponic or hydroponic system the way you need them to run! You are no longer limited to 15 minute increments with confusing dials, knobs, or DIP switches.
Select from the multiple modes of operations available. This timer has 2 relays, allowing you to interlock them together so that one relay can be on for a set time, then cycle the second relay for a different time, enabling you to automate multiple operations. Another mode will allow the relays to run independently, essentially giving you two timers for the price of one! The IX-180 has two sensor inputs that can be connected to various devices such as
temperature, humidity, or light sensors.
Easy To Use
Programming Interface
The IX-150 and IX-180 have a simple user interface that
allows you to quickly make configuration changes without having to set
confusing DIP switches or inaccurate rotating knobs.
The bright backlight LCD display provides plenty of
information so you can monitor the current status. There are three large
push buttons (up, down, & next) which allow you to quickly navigate through
the various menu options and settings.
Industry Leading Durability
The timer circuitry is enclosed in a NEMA 4x weather-tight, UV resistant enclosure with a sealed cable strain relief which is safe for outdoor use. The sealed packaging keeps water, dust, and bugs out of the electronics for trouble-free operation.
Power Options
The Timing Controller can be powered with standard AC line voltage ranging from 110-240 volts, 40-100Hz. There is also an alternate controller board available that will run on DC voltage from 8 to 24 volts. This option is perfect for systems that run off-grid, eliminating the wasted power through an inverter.
Image: High quality strain relief protects cables and stops insects and moisture
The relays can be operated in either a powered or dry configuration. This allows you to apply power to the relays from the line power that operates the controller, or you can use the relays with a different power source by simply removing the jumper wires.
The heavy-duty terminal blocks provide connections to both the normally-open and normally-closed positions of the relays, allowing for several possibilities in wiring your devices!
The default option for Power Cord and “Pigtail” consists of a 6 foot
power cord with a male 3-prong plug that can be plugged into any standard US
power receptacle. The pigtails are 6
inch cords with female 3-prong plugs that devices such as pumps, lights, or fans
can be plugged into them. If you do not need these cords then select "without Power Cord or Cables" in the Options pull-down menu and save $15.
Image: IX 180 Heavy-duty wiring and terminal blocks
The AC power cables that are provided are for 120VAC power
only. For all other voltages, including
DC, you will need to provide you own connection to a power source and
connections to the devices. For power
connections in wet or high humidity environments, it is recommended to directly
wire your devices to the timer so that the power plugs are not exposed to
water. It is also recommend to plug into
a GFCI outlet when used outdoors.
Modes of Operation
- Single Timer with Interlocked Relays:
Both relays are locked together so that only one can change at a time. Relay A will finish its first cycle, then relay B will perform its cycle.
- Dual Timer with Independent Relays: Both relays work as individual timers. Both "timers" can have their own timing settings so that two separate and independent processes can operate.
- Thermostat Mode: With the optional digital temperature
sensor, one or both of the relays can be programmed to operate based on a
temperature set point, turning the unit into a thermostat controller.
It's also possible to use one relay as a timer and the other as a thermostat!
- Analog Input Mode: The two input sensors can read analog
voltages between 0-5 volts. This allows for a variety of analog or
digital on/off sensors to be connected. Applications can range from using
light sensors to level switches or flow sensors.
The IX-180 timer is preconfigured to operate in Single Timer with Interlocked Relay mode. Relay A will be on for 15 minutes, shut off for 15 minutes, and then Relay B will turn on for 15 minutes then shut off for 15 minutes. To
change these settings, simply use the built-in keypad and display.
